Enantiomer separation of hydrophobic amino compounds by high-performance liquid chromatography using crown ether dynamically coated chiral stationary phase

CROWNPAK CR(+) column, which is powerful for the separation of amino acid enantiomers, must be used at a column temperature below 50°C and a mobile phase containing less than 15% methanol, because the chiral crown ether moiety of the stationary phase is dynamically coated on an ODS matrix. The second peak of the enantiomers of alanine-β-naphthylamide (Ala-β-NA) appeared at 204 min (k₂=148) by using ordinary mobile phase, that is, a mixture of 10 mM perchloric acid and 15% methanol. In this study, enantiomer separations of Ala-β-NA and 1-(1-naphthyl)ethylamine (1-NEA), both of which are hydrophobic amino compounds, were investigated through the modification of the mobile phase. Addition of crown ether, cyclodextrins (CDs), cations, etc., affected the stability of the complex between an analyte and the chiral moiety, leading to fast separation. The second peak of the enantiomers of Ala-β-NA appeared at 68 min (k₂=49) through the addition of 10 mM β-CD, or at 61 min (k₂=44) using potassium dihydrophosphate as a buffer component. This method was applied for the optical purity testing of -Ala-β-NA, which is used as one of the chiral derivatization reagents for carboxylic compounds. Validations such as reproducibility and linearity were also demonstrated and this method was found to be sufficient as a quality control method for the optical purity testing of -Ala-β-NA. As little as 0.05% -form in -Ala-β-NA could be determined.     

Coherent convergent beam electron diffraction for analysis of lattice fitting in PbTe/MgO bi-crystals

Coherent convergent beam electron diffraction is for the first time applied to the analysis of lattice fitting between vacuum-deposited PbTe and MgO thin crystals in the plan-view mode. The possibility of determination of the rigid-body shift is discussed on the basis of simulated diffraction patterns from the bi-crystals as well as the preliminary experimental results obtained by a 200 kV transmission electron microscope with a field emission electron gun. In the analysis, the importance of the position of interference fringes at overlaps of PbTe 200 and MgO 200 diffraction disks and that of the corresponding mirror symmetry in the whole pattern are emphasized in order to determine the rigid-body shift and the probe-position.     

Equivalent electric circuit analyses of ionic thermocurrent in sodium-doped CaF2 crystals

The characteristics of high-temperature ionic thermocurrent (HT ITC) in CaF₂ doped with different sodium concentrations were studied by the Teflon-insulated electrode ITC method. It was shown that, with increasing sodium concentration, the HT ITC band moved toward a Na⁺-F_V dipole band with a peak at 162 K. The results of analyses of the HT ITC spectra using an equivalent electric circuit proved that the activation energy of space charge migration related to HT ITC was also strongly dependent on the doped sodium concentrations if varied from 0.94 to 0.46 eV with increasing sodium concentration in our ITC study. In addition, the broadening of the Na⁺-F_V dipole band was observed in 3 nominal mole% NaF-doped CaF₂, which was accompanied by a considerable decrease of the activation energy from 0.46 to 0.29 eV without showing marked temperature shifts of the peak ITC bands.     

Michael addition of stannyl ketone enolate to alpha,beta-unsaturated esters catalyzed by tetrabutylammonium bromide and an ab initio theoretical study of the reaction course

Michael addition of stannyl ketone enolates to alpha,beta-unsaturated esters was accomplished in the presence of a catalytic amount of tetrabutylammonium bromide (Bu(4)NBr). Other typical systems using lithium enolate or silyl enolate with catalysts (TiCl(4) or Bu(4)NF) failed to give the desired products. The bromide anion from Bu(4)NBr coordinates to the tin center in enolate to accelerate the conjugate addition where a five-coordinated tin species was generated. The coordination of the bromide anion significantly raises the HOMO level of tin enolate and enhances its nucleophilicity. The conjugate addition provides the intermediate Michael adduct, which has an ester enolate moiety, and the adduct immediately transforms to alpha-stannyl gamma-ketoester by keto-enol tautomerization. This step contributes to the stabilization of the product system and leads to a thermodynamically favorable reaction course. An ab initio calculation reveals that the activation energy in the reaction using the bromide anion is lower than that of the reaction without using it. The transition state in either reaction course has a linear structure, not a cyclic one. This system can be applied to a variety of tin enolates and alpha,beta-unsaturated carbonyls involving enoates, enones, and unsaturated amides.     

Solid phase extraction of lead by Chelest Fiber Iry (aminopolycarboxylic acid-type cellulose)

Aminopolycarboxylic acid-type cellulose (Chelest Fiber Iry) has been studied for its sorption efficiencies with respect to lead from acidic solution. The influence pH and other properties related to sorption kinetic, isotherm, maximum capacity, stability and the mechanism of the sorption were discussed.Lead was quantitatively retained on the proposed adsorbent in the pH range of 2.5-5.5 (studied pH range 1.5-5.5). The maximum sorption capacity was found to be 0.86±0.06 mmol/g adsorbent. The decline in the efficiency of the adsorbent was not observed for repeated adsorption-desorption cycles. It was found that the preconcentration factor of 200 can be achieved. The limit of determination was found to be about 1 μg Pb/2 l. The method was applied to the determination of lead in water samples.     

Theoretical study of the transesterification reaction of polyethylene terephthalate under basic conditions

The depolymerization reaction of polyethylene terephthalate (PET) was analyzed using a computational chemistry approach. The reaction is a type of transesterification reaction using alkoxide. In this study we employed the calculated optimum structure, electrostatic potential distribution, activation energy, electric charges and pathway to investigate the mechanism. We found that the tetrahedral intermediate produced by ring formation with alkoxide is an essential feature of the depolymerization process. Moreover, there is a possibility that a PET molecule is depolymerized by multiple alkoxides at the same time. However, the effects of degree of polymerization and the position of attack by the alkoxides do not strongly influence the reactivity.     

Attomole catechins determination by capillary liquid chromatography with electrochemical detection.

Attomole quantities of catechins were determined by a capillary liquid chromatography system with electrochemical detection (CLC-ECD) and the system is applied to the determination of catechins in human plasma. The eight catechins: catechin (C), epicatechin (EC), gallocatechin (GC), epigallocatechin (EGC), catechin gallate (Cg), epicatechin gallate (ECg), gallocatechin gallate (GCg), and epigallocatechin gallate (EGCg), were separated within 10 min using a capillary column (0.2 mm i.d.) and a mobile phase of phosphoric acid (85%)-methanol-water (0.5:27.5:72.5, v/v/v), and were detected at +0.85 V vs. Ag/AgCl. Peak heights were found to be linearly related to the amount of catechins injected, from 200 amol to 500 fmol (r > 0.998). The detection limits of the catechins were 61 amol for EGC, 75 amol for EC, 54 amol for GC, 61 amol for C, 67 amol for GCg, 75 amol for EGCg, 75 amol for ECg and 89 amol for Cg (S/N = 3). Because the present method is highly sensitive and allows facile pretreatment for plasma sample, the time courses of concentrations of catechins (GCg, EC, EGCg, ECg, and Cg) and their conjugates in human plasma obtained from a 10 microl plasma sample after ingestion of green tea could be determined.     

Indium-Catalyzed C−F Bond Transformation through Oxymetalation/β-Fluorine Elimination to Access Fluorinated Isocoumarins

Fluorinated heterocycles have attracted much attention in the pharmaceutical and agrochemical industries. Many strategies have already been developed to achieve the synthesis of fluorinated heterocycles. Formidable challenges remain, however, in the synthesis of fluorinated isocoumarin derivatives that are among the most alluring structural motifs. Herein, the indium-catalyzed C−F bond transformation of 2-(2,2-difluorovinyl) benzoates is reported, which are readily accessible compounds, to give a diverse array of fluorinated isocoumarins. The present reaction proceeds smoothly using inexpensive reagents: a catalytic amount of indium salt in the presence of zinc salt. A theoretical calculation of potential energy profiles showed that the reaction consists of oxymetalation with the elimination of alkyl halide and the β-fluorine elimination.     

Preparation of new nitrogen-bridged heterocycles 72. A new approach to 1-acyl-3-(substituted methylthio)thieno[3',4':4,5]imidazo[1,2-a]pyridine derivatives. [corrected

The alkaline treatment of the pyridinium salts, readily available from the S-alkylations of 3-amino-4-(1-pyridinio)thiophene-5-thiolates with various alkyl halides, in chloroform at room temperature afforded the corresponding thieno[3',4':4,5]imidazo[1,2-a]pyridine derivatives in low to moderate yields via the intramolecular cyclization of the resulting 1,5-dipoles followed by the aromatization of the primary cycloadducts. Interestingly, the reactions using unsymmetrical 3-amino-4-[1-(3-methylpyridinio)]thiophene-5-thiolates afforded only 8-methylthieno[3',4':4,5]imidazo[1,2-a]pyridines and the other 6-methyl derivatives were not formed at all. In addition the isolation of a byproduct in the condensation reaction of pyridinium salt with the solvent (CHCl?) is also discussed.